What the hell has that got to do with it............Wambli Ska wrote: ↑Mon Jan 22, 2024 1:06 am .................................. but for the life of me I can’t figure out what I’d hunt with it anywhere near here.
Ruger American gen2
Re: Ruger American gen2
Re: Ruger American gen2
Guess I'm in the minority on this one. I have no desire to use one or be near someone using one at the range. I'm not debating their ability to do what the manufactures claim. I have my opinion on them and others have theirs. My opinion is based on my personal experiences around others using them at the range.
The fluted/grooved barrel is a non issue for me. I wouldn't spend the money just to get a rifle specifically for the fluted/grooved barrel, but it wouldn't stop me from buying one either.
The fluted/grooved barrel is a non issue for me. I wouldn't spend the money just to get a rifle specifically for the fluted/grooved barrel, but it wouldn't stop me from buying one either.
Re: Ruger American gen2
I don’t care about fluting either way. Don’t want to intentionally pay for it. But, I won’t kick it out of bed.
Talent hits a target no one else can hit; Genius hits a target no one else can see.
Re: Ruger American gen2
Brakes would suck if you were at a public range. But not suck as bad as being at a public range.
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: Ruger American gen2
Local public range or the range at the club my dad is a member of are my only realistic options. Either way, if someone on the next bench has a rifle with a brake its going to be a bad time. The same goes for short barreled .223 firearms. Brake or not, the blast from it usually encourages me to pack up and go home.
I think its time for me to bow out of this thread. Its been derailed enough and I think its already been determined to that I probably wont be purchasing one of the Gen 2 rifles anyways. They made some improvements, but overall I would need to change things a fair bit to be what I would prefer and I have other options on hand that will do.
Re: Ruger American gen2
I personally like the spiral barrel as well.
Re: Ruger American gen2
shotgunshooter3 wrote: ↑Tue Jan 23, 2024 8:17 pmI'm in the minority on this forum, but I like the spiral fluting a lot personally. I doubt the cost saved there would yield a better stock.
I like the spiral barrel as well
Re: Ruger American gen2
Don't see myself with one of the Americans, it doesn't make the little tractor go VROOM
I removed the brakes off most of my rifles that had them
I removed the brakes off most of my rifles that had them
"Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it." - Samuel Clemens (aka Mark Twain)
Re: Ruger American gen2
Looking through my stash of factory ammo I found a bunch of .300 BO. Noticed a Gen 2 in .300 BO at one of my local places. I have not talked myself out of it yet. The stock would need changed. I am not a fan of that style stock at all. I just dont find them comfortable for me.
Re: Ruger American gen2
Or, you could get a .308 Win and castrate it to a .300 BO with options. 
Talent hits a target no one else can hit; Genius hits a target no one else can see.
Re: Ruger American gen2
I have a .308 that hasnt seen a single round by me yet. Im more inclined to grab a .30-06 for .30 cal work. I just look at it as having the factory ammunition, a bunch of brass, and even some bullets that would be better suited in a BO than a .30 cal with any balls. My previous BO became a 5.56 with an old take off Ruger #3 barrel fit up to the R700 action. The previous one just didnt really work well and im not convinced it wasnt the barrel. I suppose if I ever end up with a R700 in .223 I could swap the barrel and try it, but I wont be doing that with the current one I have. I also have a CZ 527 in .223 that could be rebarreled, but finding a prefit for that rifle has been a tough search.
-
Wambli Ska
- Posts: 3989
- Joined: Tue Jun 20, 2023 3:09 pm
Re: Ruger American gen2
Dear Lord, you come all the way from the future just to give me crapOrchidman wrote: ↑Tue Jan 23, 2024 8:43 pmWhat the hell has that got to do with it............Wambli Ska wrote: ↑Mon Jan 22, 2024 1:06 am .................................. but for the life of me I can’t figure out what I’d hunt with it anywhere near here.![]()
Re: Ruger American gen2
What do I think of Ruger's new rifle?
My most recent centerfire purchase was one of their OLD rifles - a stainless synthetic Hawkeye based on old Mauser and Winchester design features, chambered in a cartridge that goes back a century and a quarter. That should pretty well sum up my opinion for you.
Seriously, for the modern price-point, semi-disposable, truck-beater rifles that are push feed and held together with roll pins, the Americans have struck me as being pretty much top of the class.
I like the OEM Picatinny base.
I like the round and well placed bolt knob.
I like the three-lug, short lift bolt.
I like that their 3-position safety can lock the bolt closed.
Spiral flutes on the barrel: GAAAAAAAAAY! The rifling is supposed to go on the INSIDE of the barrel guys.
Muzzle brake: I would MUCH rather have the recoil than the concussion most brakes cause. I would quickly pull and replace with a thread-protector, or a can, if I lived somewhere else.
Detachable magazine: A major reason I bought the Hawkeye .30-06 was because it DOESN'T have one, and would hastily convert my .308 Gunsite Scout to a hinged floorplate / internal mag if I could. Have found that I don't like to carry a rifle with the protrusion; don't want to juggle the extra piece of equipment. I'm hunting deer, not fending off a North Korean human wave assault. My state lets me road hunt with an empty chamber and a full mag - if yours insists on an empty mag well, OK, I understand. I also get the attraction for the .223 version as a survival rifle with everything in a convenient, ready-to-go AR-based package (for that concept, I would probably get a CZ-600 Trail instead), but otherwise, gimme a butt cuff with a shell compartment any day.
Stock: One of Bill Ruger's great triumphs was the high, straight comb of the 77 line. It really is a great stock both from an ergonomic and aesthetic perspective. The American II is going Monte Carlo. Never been a fan. Not on a Weatherby; not on this.
Short version: It's a car I'd drive as a rental, but would probably not buy as my primary.
My most recent centerfire purchase was one of their OLD rifles - a stainless synthetic Hawkeye based on old Mauser and Winchester design features, chambered in a cartridge that goes back a century and a quarter. That should pretty well sum up my opinion for you.
Seriously, for the modern price-point, semi-disposable, truck-beater rifles that are push feed and held together with roll pins, the Americans have struck me as being pretty much top of the class.
I like the OEM Picatinny base.
I like the round and well placed bolt knob.
I like the three-lug, short lift bolt.
I like that their 3-position safety can lock the bolt closed.
Spiral flutes on the barrel: GAAAAAAAAAY! The rifling is supposed to go on the INSIDE of the barrel guys.
Muzzle brake: I would MUCH rather have the recoil than the concussion most brakes cause. I would quickly pull and replace with a thread-protector, or a can, if I lived somewhere else.
Detachable magazine: A major reason I bought the Hawkeye .30-06 was because it DOESN'T have one, and would hastily convert my .308 Gunsite Scout to a hinged floorplate / internal mag if I could. Have found that I don't like to carry a rifle with the protrusion; don't want to juggle the extra piece of equipment. I'm hunting deer, not fending off a North Korean human wave assault. My state lets me road hunt with an empty chamber and a full mag - if yours insists on an empty mag well, OK, I understand. I also get the attraction for the .223 version as a survival rifle with everything in a convenient, ready-to-go AR-based package (for that concept, I would probably get a CZ-600 Trail instead), but otherwise, gimme a butt cuff with a shell compartment any day.
Stock: One of Bill Ruger's great triumphs was the high, straight comb of the 77 line. It really is a great stock both from an ergonomic and aesthetic perspective. The American II is going Monte Carlo. Never been a fan. Not on a Weatherby; not on this.
Short version: It's a car I'd drive as a rental, but would probably not buy as my primary.
WWJMBD?
I believe we should stand on Ceremony. . . while our friends handcuff the sanctimonious little prick and take him away.
I believe we should stand on Ceremony. . . while our friends handcuff the sanctimonious little prick and take him away.
Re: Ruger American gen2
Muzzle brakes are awesome, cans are more awesomer. Living in the USA where I can hunt with a can is the mostest bestest awesomest
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: Ruger American gen2
The stock bothers me, but it does look like there is at least a Boyds option for a replacement. It just adds a bunch of cost to the rifle.
- shotgunshooter3
- Posts: 635
- Joined: Wed Jun 21, 2023 4:07 pm
Re: Ruger American gen2
I like muzzle brakes so much I have a muzzle brake on the end of my can, that in turn attaches over another muzzle brake. Muzzle brake-ception.
"Speed is the economy of motion" - Scott Jedlinski
- breamfisher
- Posts: 753
- Joined: Tue Jun 20, 2023 10:11 pm
Re: Ruger American gen2
That's some kinda weird human centipede action going on!shotgunshooter3 wrote: ↑Mon Apr 15, 2024 11:35 pmI like muzzle brakes so much I have a muzzle brake on the end of my can, that in turn attaches over another muzzle brake. Muzzle brake-ception.
9mm kills the body, but .45 ACP destroys the soul!
-a Fudd, probably
-a Fudd, probably
Re: Ruger American gen2
Just bought a scope without a rifle host (yet). Might have to order one of these in .204 Ruger to scratch an itch I've had for a while to drive little .20 cal bullets really really fast...
Re: Ruger American gen2
Bought one in 308 today. Will review after I shoot tomorrow.
FYI, you can remove the trigger dingus easily and with no ill effect. Fudge your safety.
FYI, you can remove the trigger dingus easily and with no ill effect. Fudge your safety.
- Attachments
-
- IMG_5063.jpeg (2.5 MiB) Viewed 2629 times
-
- IMG_5065.jpeg (1.94 MiB) Viewed 2629 times
-
- IMG_5066.jpeg (2.58 MiB) Viewed 2629 times
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: Ruger American gen2
Talent hits a target no one else can hit; Genius hits a target no one else can see.
Re: Ruger American gen2
Well, it shoots 3/4 MOA groups with Hornady factory ammo.
And I accidentally bought an MDT chassis for it.
I’ll do a real report later.
- Attachments
-
- IMG_5249.jpeg (3.71 MiB) Viewed 2573 times
-
- IMG_5086.jpeg (3.41 MiB) Viewed 2573 times
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: Ruger American gen2
Looking good with the chassis.
Re: Ruger American gen2
I've read some reports that the MDT chassis blocks a cleaning rod, even when moving the cheek piece all the way down.
True?
True?