I have had the hardener leak out of a seemingly brand new and unopened box.CPJ 2.0 wrote: ↑Sat Jul 15, 2023 12:28 amI can’t remember which of the two parts of the devcon went bad. But I know I was pissed because it was almost $40PFD45 wrote: ↑Fri Jul 14, 2023 11:27 pmDon't know about Devcon but on a tip, I started keeping Shoe Goo in the freezer. I get it out day before using and it's always juicy!CPJ 2.0 wrote: ↑Wed Jul 12, 2023 4:38 pm I’ve tried the putty, wasn’t a huge fan. It’s less mess, but too much in one spot and it props it up funny ways. I’d rather lube up the action and tape off the stock. Let epoxy googe out. Micro balloons or steel powder added helps thicken it up if need be. JB weld end up fairly thick and doesn’t do a bad job.
The Devcon stuff is good, but once you open it the shelf life SUCKS.
(Probably ruin Devcon)
10/22 Stock Recommendations
-
farmboy II
- Posts: 31
- Joined: Sat Jul 01, 2023 2:38 am
Re: 10/22 Stock Recommendations
“Sometimes we forget that the simple things in life bring us the most pleasure.” -Dad
Re: 10/22 Stock Recommendations
Parts are arriving...
- IMG_2313.jpeg (3.22 MiB) Viewed 2624 times
Re: 10/22 Stock Recommendations
You went serious!!
Talent hits a target no one else can hit; Genius hits a target no one else can see.
Re: 10/22 Stock Recommendations
It's going to be a dedicated bench gun, so weight isn't really a consideration.
Re: 10/22 Stock Recommendations
Stock and trigger kit was supposed to be delivered today. Delayed by FedEx.
That makes me sad.
That makes me sad.
Re: 10/22 Stock Recommendations
- IMG_2329.jpeg (2.62 MiB) Viewed 2589 times
- IMG_2330.jpeg (3.88 MiB) Viewed 2589 times
Re: 10/22 Stock Recommendations
Like.
Talent hits a target no one else can hit; Genius hits a target no one else can see.
Re: 10/22 Stock Recommendations
@cpj - good call on the VQ parts. Trigger pull went from 4 lbs to 2 lbs and is much better overall.
Re: 10/22 Stock Recommendations
Good news.
I dig that stock. Didn’t know they made that color.
Have you done the bolt hold open modification yet? The one where you don’t have to push that stupid tab up to release the bolt? Just pull back and let fly?
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: 10/22 Stock Recommendations
No, but I saw it installed on one of the videos I watched for the trigger upgrade so it's on the list along with maybe some trigger shims.
Re: 10/22 Stock Recommendations
If you own a round file and are capable of wiping your own backside, you can make one yourself. Lemme find it.jkp wrote: ↑Tue Jul 18, 2023 11:17 pmNo, but I saw it installed on one of the videos I watched for the trigger upgrade so it's on the list along with maybe some trigger shims.
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: 10/22 Stock Recommendations
Go watch this. Easy peasy.
https://youtu.be/d6UafJ1dfiY
And the shims would be nice, the fit it pretty sloppy from the factory.
https://youtu.be/d6UafJ1dfiY
And the shims would be nice, the fit it pretty sloppy from the factory.
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: 10/22 Stock Recommendations
Definitely need to bed it. Lots of hollow areas around the action. Anyone with direct experience bedding the MagPul stock. Lots of videos and what not but I can screw something up with the best of them.
Re: 10/22 Stock Recommendations
- IMG_2326.jpeg (3.69 MiB) Viewed 2569 times
Re: 10/22 Stock Recommendations
Haters.
Talent hits a target no one else can hit; Genius hits a target no one else can see.
-
shotgunshooter3
- Posts: 635
- Joined: Wed Jun 21, 2023 4:07 pm
Re: 10/22 Stock Recommendations
Best 10/22 mod out there, by far. At least when you consider cost vs effort vs reward.
"Speed is the economy of motion" - Scott Jedlinski
Re: 10/22 Stock Recommendations
Yes.shotgunshooter3 wrote: ↑Wed Jul 19, 2023 2:01 pmBest 10/22 mod out there, by far. At least when you consider cost vs effort vs reward.
It’s like a 5 minute job. Well worth it.
“The shepherd slaughters more of the flock than the wolf ever will.”
Re: 10/22 Stock Recommendations
Did a couple today. I'm ready for my assistant to the junior gunsmith certificate.CPJ 2.0 wrote: ↑Tue Jul 18, 2023 11:39 pm Go watch this. Easy peasy.
https://youtu.be/d6UafJ1dfiY
And the shims would be nice, the fit it pretty sloppy from the factory.
Re: 10/22 Stock Recommendations
Sweet. Certainly isn’t worth $20 or whatever they cost these days.jkp wrote: ↑Wed Jul 19, 2023 6:51 pmDid a couple today. I'm ready for my assistant to the junior gunsmith certificate.CPJ 2.0 wrote: ↑Tue Jul 18, 2023 11:39 pm Go watch this. Easy peasy.
https://youtu.be/d6UafJ1dfiY
And the shims would be nice, the fit it pretty sloppy from the factory.
“The shepherd slaughters more of the flock than the wolf ever will.”