The last person to post in this thread don’t get nothing.

[GrapeApe]

I hate "Drain" plumbing repairs a LOT more than supply side

[Rugerfan]

It was drain. It took me all day but I finally got it done.

I had to install a laundry tub/sink for our new washer to discharge in. This new washer pumps out so much faster that it was overwhelming the original drain.

[GrapeApe]

At least it was gray water plumbing instead of brown

[Rugerfan]

Agreed!!!

[Zorba]

Have you ever danced with the devil in the pale moonlight?

[jbp-ohio]

Gas valve on the furnace crapped out. Not a DIY kind of thing. Should only cost one kidney.

[CPJ 2.0]

Gas valve on the furnace crapped out. Not a DIY kind of thing. Should only cost one kidney.

Pffft.
Unscrew old one. Screw in new one.

[jbp-ohio]

I'll just use a piece of aquarium hose to adjust the valve to 4'' of water column......

[CPJ 2.0]

Google it.

[jbp-ohio]

Google it.

I watched many Youtubes video's. All were prefaced with, "We don't recommend you do this, but here is how we do it. If you die we aren't responsible."

[CPJ 2.0]

If you like SOAD and have heard of the B52s, you should watch this.

https://youtu.be/-0XLruQ3KMc?si=bssJDGFWFo_fzeuV




If you think I misspelled toad, and think I’m referring to an airplane, it’s not for you.

[CPJ 2.0]

Rebuilding my meat grinder.
Got this gearbox/motor combo for free ninety nine.
Motor was bad.
Robbed the motor shaft, designed a printed housing to hold it. Will be powered by the De-Wilt drill, but can be run from a cordless drill also.
Not done, and those are a couple different revisions, so nothing you see is final.

[jbp-ohio]

Jeffrey approves..........

[Japhy]

So who got the last post in on the old forum and won the 22 brick? Just curious?

[CPJ 2.0]

So who got the last post in on the old forum and won the 22 brick? Just curious?

Me. I posted a picture of a great big horse pecker

[Japhy]

Cpj
That’s quite a neat meat grinder. Maybe Dewalt will put it in the product line? I might be tempted if it was compatible with my batteries. Or like the tv ads for the portables smoothie blender we could see one of those cute spokesmodels chuck a rabbit in one poolside

[CPJ 2.0]

I can use my cordless, its got plenty of umph. And a clutch. The de wilt.....shes gonna be on, or stuffs broke. Aint no clutch involved.

[Justsomedude]

I cant remember who it was on the old forum that posted a reply to Chris's meat grinder and only said,
"Your machine terrifies me."

[CPJ 2.0]

I cant remember who it was on the old forum that posted a reply to Chris's meat grinder and only said,
"Your machine terrifies me."

And it should! Any reasonable person would avoid it. Even when sitting still.

[CPJ 2.0]

https://www.instagram.com/reel/CxvYqqNo ... BiNWFlZA==

[jbp-ohio]

Not going to spend any $$$ to see it, but I want to see it as soon as I can. It was made by Apple and my wife has AppleTV. Hopefully it will be on there soon..........

https://youtu.be/OAZWXUkrjPc?si=-1l2ixpYUfPMT7LD

[jbp-ohio]

Nine hour road trip this past weekend to southern Tennessee. Youngest stepson got married. Venue was right on the Hiwassee River. Very nice area. Everything went smoothly. They asked everyone to not take pics with their phones...... so I didn't take any. I wasn't even allowed to bring a fishing pole



We rented a nearby cabin for the weekend. It was a dump. It was (poorly) cut into the side of a hill. They didn't even clean up any of the fall leaves so you couldn't tell where the driveway was. Just looked up this pic. Didn't even know you were to park at 'X'. We followed the arrow in and out.....

96142134_978670585923564_1085469077582905344_n.jpg (724.55 KiB) Viewed 3675 times

The drive to the cabins was steep, and washboarded with ruts. Luckily we were in my wife's Range Rover. 1/3 of the way up that drive was the drive to our cabin. The leaves were wet and slippery and we needed all four wheels gripping. We were driving other guest's up the hill to their cabins. My middle stepsons Chrysler 300 did better than the other guests FWD Suv's and mini-vans. It has a true independent rear suspension that stayed connected to the road going over the ruts. The other vehicles had so much tire bounce that they lost traction. He at least made it up the hill to where our cabin drive started. It couldn't do anything on the leaves however. Trying to walk to the stairs we were slip sliding all over. The leaves also covered up the many large rocks sticking up causing a trip hazard.

On the way down, the stretch of I-70 from Cambridge to Columbus looked like a massacre had taken place. Semi's vs lovestruck bucks are a lopsided contest. Every mile was another gruesome scene of blood and guts. We saw a few roadkill on I-75 thru Kentucky and Tennessee but I-70 was 50-1 the carnage leader.

[Japhy]

I cant remember who it was on the old forum that posted a reply to Chris's meat grinder and only said,
"Your machine terrifies me."

And that is only the 1/20 scale prototype.

[Justsomedude]

Spent ALL day putting a DRO on my milling machine and I really wish I had done so years ago. No more setting indicators, no more backlash... It'll really speed up jobs on the mill now.

[CPJ 2.0]

Spent ALL day putting a DRO on my milling machine and I really wish I had done so years ago. No more setting indicators, no more backlash... It'll really speed up jobs on the mill now.

I don’t think I told you so, but I was damn sure thinking it.