The last person to post in this thread don’t get nothing.

[CPJ 2.0]

Carbide tooling is amazing. Magical. Maybe even demonic. I’ve made some end mills do some terrible things, and it keeps on trucking.
High speed steel? Never heard of her.

[Justsomedude]

Carbide tooling is amazing. Magical. Maybe even demonic. I’ve made some end mills do some terrible things, and it keeps on trucking.
High speed steel? Never heard of her.

Agreed. I rarely ever use hss, especially in the mill. Amazon has carbide endmills cheap enough to almost consider them disposable use items. I buy a bunch for RMR cuts and they plow through hardened slides with ease. I feel bad for the old guys (like my dad) that had to use hss for everything.

[CPJ 2.0]

I was fortunate enough to have some guys hit me up.
“Hey. I have some random cutters. You want them?”

Yep.

I EASILY got over 1k in tooling from a friend. Some of it was stuff he got as samples from tool reps. Some were used from his job, they’d run ONE part and swap tools. Cutters were basically new.
Then I’m sure there were some that were “used”…….

[CPJ 2.0]

IMG_3759.jpeg (2.29 MiB) Viewed 1853 times

[Rugerfan]

Looking good!!!

[CPJ 2.0]

IMG_3767.jpeg (1.34 MiB) Viewed 1846 times

[Diver43]

IMG_3767.jpeg

They look Great!!!

[PFD45]

Awesome, did you settle on a brand yet?

[CPJ 2.0]

Awesome, did you settle on a brand yet?

Jackson Built.


Im not wild about it, but, I have an Etsy store with that name currently and I have a a tiny, tiny bit of exposure there. Which, is better than none. And its a pain in the dingus to change it.

As far as a model, it will be the SMF4. Maybe the SMF. Maybe SMF 4.1.

SMF 4.1 has a better ring to it. Its the Sharp Middle Finger 4.1" blade.

[Zee]

Boy got skilz!

[shotgunshooter3]

Awesome, did you settle on a brand yet?

Jackson Built.


Im not wild about it, but, I have an Etsy store with that name currently and I have a a tiny, tiny bit of exposure there. Which, is better than none. And its a pain in the dingus to change it.

As far as a model, it will be the SMF4. Maybe the SMF. Maybe SMF 4.1.

SMF 4.1 has a better ring to it. Its the Sharp Middle Finger 4.1" blade.

I'll be in line to order one once they're available!

[Wambli Ska]

Good job! I’m happy to see a cool business idea come to fruition!

[Justsomedude]

They look amazing. Seems you have the edge sharpening down now too.

[CPJ 2.0]

They look amazing. Seems you have the edge sharpening down now too.

Thanks.
About 2-3 passes on each side on the belt grinder with a 220 grit belt is all it takes to establish the edge. Then it’s on to a diamond stone, ceramic rods, then leather strop with 19 micron diamond paste.
The knife eating electric work sharp abortion can kick rocks.
(Just a side note)
(And the fans which I used to be one will defend them)

[Justsomedude]

It's a rarity to get a new blade with a razors edge anymore. I always wondered if it was for a particular reason or the manufacturer was just shìt at sharpening knives. Those really do look awesome though and I'm glad that it's working out for you.

[CPJ 2.0]

Side note, you as a smith of guns need this.



https://www.amazon.com/dp/B09Z34FMVY/ref=cfb_at_prodpg




Put on a leather strop it makes metal parts really shiny.
But USE IT SPARINGLY. It doesn’t take much to coat the strop

[Justsomedude]

Side note, you as a smith of guns need this.



https://www.amazon.com/dp/B09Z34FMVY/ref=cfb_at_prodpg




Put on a leather strop it makes metal parts really shiny.
But USE IT SPARINGLY. It doesn’t take much to coat the strop

Interesting concept that I've never tried. One thing I'd love to know the secret of is how the hell other people are polishing guns on a large scale volume. It's the one thing i despise about hot bluing. It takes an average of about 10 hours to high polish a revolver to blue and you really can't do it any faster unless you want to knock over edges and divot screw holes.

[CPJ 2.0]

It works awesome to give a knife the extra sliceyness. And ok small parts it works good. Probably wouldn’t be the best for polishing a whole gun.

[Japhy]

CPJ those look like some great blades! Nice work!

[CPJ 2.0]

CPJ those look like some great blades! Nice work!

Thanks. If the sheath would only be so “easy”.

[Japhy]

CPJ those look like some great blades! Nice work!

Thanks. If the sheath would only be so “easy”.

The sheath for my original sharpfinger is the weak link. I do not like the design or the securing strap. The stitching failed long ago I restitched portions with spectra fishing line.

An improvement would be formed Kydex and integral bell loop or clip. It’s water proof doesn’t degrade and is easily riveted. Just a thought

[Justsomedude]

CPJ those look like some great blades! Nice work!

Thanks. If the sheath would only be so “easy”.

Sometimes ya just gotta let Chy-nah take care of the little details

[CPJ 2.0]

CPJ those look like some great blades! Nice work!

Thanks. If the sheath would only be so “easy”.

Sometimes ya just gotta let Chy-nah take care of the little details

I’ve already looked at that. The main issue is availability. I found one sheet that would most likely work. However, one day they had them in the next day they didn’t.
These will be 3-D printed I just have to get it designed which is a challenge for me

[bullsi1911]

Awesome, did you settle on a brand yet?

Jackson Built.


Im not wild about it, but, I have an Etsy store with that name currently and I have a a tiny, tiny bit of exposure there. Which, is better than none. And its a pain in the dingus to change it.

As far as a model, it will be the SMF4. Maybe the SMF. Maybe SMF 4.1.

SMF 4.1 has a better ring to it. Its the Sharp Middle Finger 4.1" blade.

Oh. I was thinking it was “smell my finger”

[CPJ 2.0]

I hid this noise maker that chirps like a cricket (or other beeps you select) in our office about 8 months ago.

Boss found it today.