Page 1 of 1
Here's something interesting....
Posted: Tue Nov 10, 2026 1:43 am
by breamfisher

- FB_IMG_1794274873288.jpg (45.94 KiB) Viewed 278 times
From the Military Arms Channel Facebook page.
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 1:51 am
by Elk Creek
That’s what happens when gun are essentially illegal, they find a way! A liberator carbine!
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 2:02 am
by Zee
Yep.
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 11:33 am
by Freezer
I was thinking I saw something like this before, just never in a carbine. Somebody messed with a rare and cool pieces of history.
https://en.wikipedia.org/wiki/FP-45_Liberator
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 1:16 pm
by Bigslug
Agreed, but in the context of what the Liberator was all about. . .
If you're starving and desperate, and you have to sneak up on and take out someone who's young, fit, and armed with an MP40, and all you've got to do it with is a single shot smoothbore pistol. . .
Well. . .maybe there's something to making the most out of that pistol.

Re: Here's something interesting....
Posted: Tue Nov 10, 2026 1:50 pm
by Freezer
I don't think they had pic rails and red dot scopes in WWII
I say again, somebody spent a lot of time destroying an interesting rare piece of history.
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 1:55 pm
by Wambli Ska
Wasn't there a run of modern made ones just a few years ago? In any case I hope they used a rifled barrel to take advantage of the red dot. The original were smooth bore IIRC.
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 2:11 pm
by bullsi1911
Well… that is a thing.
Yeah, there was a company making rifles barrel reproductions a few years ago. And for some reason they were REALLY expensive
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 3:43 pm
by Freezer
OK, that was cool! They really aren't that expensive and fill a niche.
http://www.liberatorpistol.com/
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 4:00 pm
by shotgunshooter3
There's a company that makes a reproduction, with the addition of rifling and I THINK some reinforcement elsewhere in the design so it could be shot more than a few times. I've considered grabbing one for the entertainment.
https://vintageordnance.com/product/wwi ... model-3-3/
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 4:09 pm
by Freezer
Vintage is an interesting reproduction company, I spend an hour at their website looking at all the cool stuff. This has been an interesting rabbit hole.
https://vintageordnance.com/?srsltid=AY ... yC0l4xfIMZ
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 4:35 pm
by CPJ 2.0
5-700 for something worse than I could cobble together in my garage? (history aside, of course)
Yeah no. I’ll appreciate the history and ingenuity in pictures.
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 8:19 pm
by shotgunshooter3
CPJ 2.0 wrote: ↑Tue Nov 10, 2026 4:35 pm
5-700 for something worse than I could cobble together in my garage? (history aside, of course)
Yeah no. I’ll appreciate the history and ingenuity in pictures.
So what you're saying is.... making one in 9mm.... is not outside the realm of possibility...
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 8:53 pm
by CPJ 2.0
shotgunshooter3 wrote: ↑Tue Nov 10, 2026 8:19 pm
CPJ 2.0 wrote: ↑Tue Nov 10, 2026 4:35 pm
5-700 for something worse than I could cobble together in my garage? (history aside, of course)
Yeah no. I’ll appreciate the history and ingenuity in pictures.
So what you're saying is.... making one in 9mm.... is not outside the realm of possibility...
Anything’s possible.
Not everything is likely.
Re: Here's something interesting....
Posted: Tue Nov 10, 2026 9:00 pm
by Wambli Ska
CPJ 2.0 wrote: ↑Tue Nov 10, 2026 8:53 pm
shotgunshooter3 wrote: ↑Tue Nov 10, 2026 8:19 pm
CPJ 2.0 wrote: ↑Tue Nov 10, 2026 4:35 pm
5-700 for something worse than I could cobble together in my garage? (history aside, of course)
Yeah no. I’ll appreciate the history and ingenuity in pictures.
So what you're saying is.... making one in 9mm.... is not outside the realm of possibility...
Anything’s possible.
Not everything is likely.
You could probably make something better out of a block of Aluminum a few pins and some spare parts from an old .22 rifle
