The last person to post in this thread don’t get nothing.

[Wambli Ska]

I may get some hate for this, but this has to be the ugliest revolver of the time. The body lines are horrendous. It looks like an aardvark. But I just bought an Uberti 1849 colt pocket pistol, because why not?
b10.jpg

They are much nicer after a conversion

IMG_3059.jpeg (4.83 MiB) Viewed 2073 times

[sakodude]

I'm a night owl AND insomnia sucks but this is when my gears get turning. Since I'm doing paper cartridges anyways, I'm considering my muzzleloader build to be a breech loader with a bolt action that seals the chamber with two tapers. Still have a side lock hammer and the percussion nipple sitting midway on the charge. Thoughts?

Look at the original Sharps breechloading design. Closing the breech with the lever cuts the back of the paper cartridge and It’s an elegant and simple design. I’ll bet you could make that action in one weekend….

Saw an Italian made version of one of those recently at an LGS. Price was almost good enough to consider experimenting with.

[Justsomedude]

I may get some hate for this, but this has to be the ugliest revolver of the time. The body lines are horrendous. It looks like an aardvark. But I just bought an Uberti 1849 colt pocket pistol, because why not?
b10.jpg

They are much nicer after a conversion
IMG_3059.jpeg

I do like that one. Is that an 1860 model because it definitely looks good, unlike the 1860 aardvark that I posted a pic of.

[Justsomedude]

And just a wife complaint and I'm sure someone here with a 3d printer will relate to this. I spent a good amount of time setting the Z height of my 3d printer table the other night to print my percussion caps, get to looking for the laptop today and of ALL the places the wife could set the laptop, she sets it on my 3d printer table.
To the moon Alice!!!

[Japhy]

And just a wife complaint and I'm sure someone here with a 3d printer will relate to this. I spent a good amount of time setting the Z height of my 3d printer table the other night to print my percussion caps, get to looking for the laptop today and of ALL the places the wife could set the laptop, she sets it on my 3d printer table.
To the moon Alice!!!

I went on a fishing run for a week had a project strung out on the bench. When I returned my dearest had “cleaned up that mess” arghhhh!

[Wambli Ska]

I may get some hate for this, but this has to be the ugliest revolver of the time. The body lines are horrendous. It looks like an aardvark. But I just bought an Uberti 1849 colt pocket pistol, because why not?
b10.jpg

They are much nicer after a conversion
IMG_3059.jpeg

I do like that one. Is that an 1860 model because it definitely looks good, unlike the 1860 aardvark that I posted a pic of.

Colt Model 1871–72 Open Top chambered in .45 Colt.

[Wambli Ska]

I'm a night owl AND insomnia sucks but this is when my gears get turning. Since I'm doing paper cartridges anyways, I'm considering my muzzleloader build to be a breech loader with a bolt action that seals the chamber with two tapers. Still have a side lock hammer and the percussion nipple sitting midway on the charge. Thoughts?

Look at the original Sharps breechloading design. Closing the breech with the lever cuts the back of the paper cartridge and It’s an elegant and simple design. I’ll bet you could make that action in one weekend….

Saw an Italian made version of one of those recently at an LGS. Price was almost good enough to consider experimenting with.

And we’re not seeing pictures because?????????

[sakodude]

Look at the original Sharps breechloading design. Closing the breech with the lever cuts the back of the paper cartridge and It’s an elegant and simple design. I’ll bet you could make that action in one weekend….

Saw an Italian made version of one of those recently at an LGS. Price was almost good enough to consider experimenting with.

And we’re not seeing pictures because?????????

I did say almost good enough. It was still enough to make you wonder if it's use would warrant the expense.

[Wambli Ska]

[CPJ 2.0]

Second try at powder coat. Much better. Sure standing an oven on end and drilling a hole through the side may be sketchy, but no one died.

[Zee]

Where there’s a will…….

[CPJ 2.0]

Where there’s a will…….

There’s a safety violation.


Sketchy home built vertical oven coming this weekend. Or at least the parts will arrive.

[Justsomedude]

Sir, I'm fairly certain that you just voided the warranty on your oven.

[N454casull]

Where there’s a will…….

There’s a safety violation.


Sketchy home built vertical oven coming this weekend. Or at least the parts will arrive.

Buddy of mine uses a propane vertical smoker he got cheap at a garage sale. Works great.

[CPJ 2.0]

I prefer electric. I can control it pretty much exactly the way I want. And they say not to use propane, due to fire risk. To that I pfffffttttt. Doubt it would happen.
But the main thing is I don’t want to have to putz around with getting the tank filled.
Plug in cord, bake parts.
It will also double as a tempering oven.

[Justsomedude]

I can't even begin to tell you how cute this little thing is and how much I can't wait to take it to the range. It's a .31 caliber.

20240306_191753.jpg (7.86 MiB) Viewed 1954 times

[sakodude]

Looks fun! I think I have a round ball mold for that.

[Justsomedude]

I wish I would have been able to find the model with the loading lever but I do like the way this one looks without it. Guess I'll have to buy a loading stand.

[sakodude]

I wish I would have been able to find the model with the loading lever but I do like the way this one looks without it. Guess I'll have to buy a loading stand.

https://www.midwayusa.com/product/1002298925?pid=369889

[Wambli Ska]

I prefer electric. I can control it pretty much exactly the way I want. And they say not to use propane, due to fire risk. To that I pfffffttttt. Doubt it would happen.
But the main thing is I don’t want to have to putz around with getting the tank filled.
Plug in cord, bake parts.
It will also double as a tempering oven.

And you can warm up your Hot Pockets for lunch…

[Wambli Ska]

I wish I would have been able to find the model with the loading lever but I do like the way this one looks without it. Guess I'll have to buy a loading stand.

Ooooooooor, you could make a cylinder and firing pin and convert it to CF in .32 Colt!

[CPJ 2.0]

I prefer electric. I can control it pretty much exactly the way I want. And they say not to use propane, due to fire risk. To that I pfffffttttt. Doubt it would happen.
But the main thing is I don’t want to have to putz around with getting the tank filled.
Plug in cord, bake parts.
It will also double as a tempering oven.

And you can warm up your Hot Pockets for lunch…

Nothing like the taste of melted plastic (which is what powder coating is) mixed in with your lunch!



Ones ready save for scales, four need heat treat, coated scales, and sharpened.

[Justsomedude]

I wish I would have been able to find the model with the loading lever but I do like the way this one looks without it. Guess I'll have to buy a loading stand.

https://www.midwayusa.com/product/1002298925?pid=369889

Dammit

[jbp-ohio]

Hmm....... What do I want more? To give them out or to receive them ?

428107368_120205497264700543_7777851898411688025_n.jpg (72.32 KiB) Viewed 1914 times

[jbp-ohio]

Wife and I want to put glass french doors to our office.

20240307_112553.jpg (3.46 MiB) Viewed 1897 times

I have been watching for affordable used on FB Marketplace. Finally found a pair that will fit (with some trimming).

Screenshot_20240306_184928_Facebook.jpg (1015.42 KiB) Viewed 1897 times

I message, "Will take this price?"
Seller, "Sure!"
Me, "Can I pick up at this time?"
Seller, "I'm free all day."
Me, "Ok. Send me the address and we will be there at that time."
Seller, "............... crickets "


Message again this morning.... Nothin
Da fuq wrong with people?