Good Bad & Ugly shops

General discussions not related to firearms.
Jay
Posts: 400
Joined: Wed Jun 21, 2023 1:18 pm

Re: Good Bad & Ugly shops

Post by Jay »

Thanks for peeking in and updating, Ron. As usual, there’s always stuff to be done… 8-)
Jay
Posts: 400
Joined: Wed Jun 21, 2023 1:18 pm

Re: Good Bad & Ugly shops

Post by Jay »

As for the Coke machine, since it didn’t come with a key, I ordered a new lock cylinder for it. It would suck if that thing got locked without a key. I’d be forced to drill out the lock.

I got an email from the place I ordered the cooling deck from. Specific instructions on how to package and send my core to them. They won’t ship the new one until they have my core. So that’s a bit of a delay. I’ve got the old cooling deck out. Just need to round up the stuff to pack it and take it to UPS. So I’m guessing a couple weeks before I might be able to get it running. I also plugged it in and noticed the lights don’t come on. Old fluorescent lights. I’m going to look into converting it to LED. The evaporator fan came on and sounds nice and quiet. Thermostat clicks on and off. So hopefully cooling deck, lock and lights is all I need for now.
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

If you haven't ordered the lock yet Jay ..... let me know .
I have had many machines over the years .
The locks usually are all keyed alike for a route .
I have a box of those so if you need one let me know & I'll send it to you ..... free .
They are easy to take out & put in .
:D
Jay
Posts: 400
Joined: Wed Jun 21, 2023 1:18 pm

Re: Good Bad & Ugly shops

Post by Jay »

Thanks Ron. Had I known that, I’d have taken you up on it. But I already have one ordered. Luckily it wasn’t very expensive. Appreciate the offer, sir.
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

Any time Jay .
You should pull the old lock out right away so it doesn't accidentally get locked .
Jay
Posts: 400
Joined: Wed Jun 21, 2023 1:18 pm

Re: Good Bad & Ugly shops

Post by Jay »

That and a few other chores is on the agenda for this evening. But the temp was reading 104 when I got home from work. So, a cold beer and AC until the temp comes down 10 degrees or so, then I’ll go out and play.. :D
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

Those temps are crazy Jay .
Nothing like that around here ...... yet .
I do split shifts on those kind of days here .
The high humidity we get here can really take it out of you .
At least with some power in my west shops now I can get in front of a fan for a small break .
I do high work when it's cool & on the floor as it heats up .
The sky jack I bought is really helping out .
Up & down a ladder or monkey bars is not much fun for a old guy !
I like to sneak in projects to break up the construction things .
I picked up a tilt bed trailer that needs a lot of work .
That will make hauling a few toys I have a lot easier .
But man is it ugly right now !
:lol:
ugly buy.JPG
ugly buy.JPG (267.87 KiB) Viewed 10843 times
[/size][/b]
User avatar
bullsi1911
Posts: 1207
Joined: Tue Jun 20, 2023 1:46 pm
Location: Austin By God Texas

Re: Good Bad & Ugly shops

Post by bullsi1911 »

Finally had the time to get the last of the furniture, boxes and equipment into the tower dungeon. Now it’s time to unpack and organize!
IMG_0139.jpeg
IMG_0139.jpeg (3.01 MiB) Viewed 10794 times
To make something simple is a thousand times more difficult than to make something complex.
-Mikhail Kalashnikov

AKA ‘Admin’
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

Nice job there 1911
That will be a great space to play in .
Mine is still a work in progress .

Me getting that far is still a dream .
I like to break up the construction with smaller projects & sorting & organizing .
I am making better strides since I retired .
Just a big job for one old man .
:)
User avatar
breamfisher
Posts: 748
Joined: Tue Jun 20, 2023 10:11 pm

Re: Good Bad & Ugly shops

Post by breamfisher »

That's a lot of work for something that's a waste of time.
9mm kills the body, but .45 ACP destroys the soul!
-a Fudd, probably
User avatar
bullsi1911
Posts: 1207
Joined: Tue Jun 20, 2023 1:46 pm
Location: Austin By God Texas

Re: Good Bad & Ugly shops

Post by bullsi1911 »

breamfisher wrote: Sun Jun 16, 2024 10:06 pm That's a lot of work for something that's a waste of time.
It sure as hell ain’t saving me any money. That room was expensive!
To make something simple is a thousand times more difficult than to make something complex.
-Mikhail Kalashnikov

AKA ‘Admin’
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

Fixing things up is never cheap .
I never think of improvements as a waste of time .
Doing the work yourself saves a lot of money .
A good way to stay out of trouble too .
Lazy no talent people may think it's a waste of time .


User avatar
bullsi1911
Posts: 1207
Joined: Tue Jun 20, 2023 1:46 pm
Location: Austin By God Texas

Re: Good Bad & Ugly shops

Post by bullsi1911 »

IMG_0341.jpeg
IMG_0341.jpeg (1.83 MiB) Viewed 10653 times
Got the reloading bench set up. Still a few boxes to deal with and deer heads n,stuff to put on the walls… but it usable now
To make something simple is a thousand times more difficult than to make something complex.
-Mikhail Kalashnikov

AKA ‘Admin’
Diver43
Posts: 1213
Joined: Wed Jun 21, 2023 4:16 am

Re: Good Bad & Ugly shops

Post by Diver43 »

bullsi1911 wrote: Fri Jul 26, 2024 10:28 pm IMG_0341.jpeg

Got the reloading bench set up. Still a few boxes to deal with and deer heads n,stuff to put on the walls… but it usable now
Looks Good. I have the same bench. Not bad for the $$
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

[That's a nice looking set up .
It will be a good place to play around in for the winter months .
[
















[/b]
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

I finally have some more led lights up in shop 3 first floor .
With all the heat & humidity around here I stick to things on the ground floor .
Attachments
shop 3 leds.JPG
shop 3 leds.JPG (230.52 KiB) Viewed 10645 times
Jay
Posts: 400
Joined: Wed Jun 21, 2023 1:18 pm

Re: Good Bad & Ugly shops

Post by Jay »

Looking good, guys.

Just realized I never followed up with my Coke machine project.

New cooling deck installed. It gets nice and cold now. Actually, almost too cold. Probably need to do some messing with it. With the thermostat at its warmest setting, it’s at a constant 36 degrees inside. Nice for cold beer. But the compressor spends a lot of time running. Of course, this thing also isn’t the best insulated thing..
78E0AA09-A170-445F-BD57-E08E12193026.jpeg
78E0AA09-A170-445F-BD57-E08E12193026.jpeg (2.91 MiB) Viewed 10633 times
Also put a couple LED lights in it.
86228239-8C42-4BD8-9F61-50021DF9B8B4.jpeg
86228239-8C42-4BD8-9F61-50021DF9B8B4.jpeg (925.64 KiB) Viewed 10633 times
And, of course, stocked some beer in it.
D30AB597-8A5C-4D5F-97DC-3B70F4E182C7.jpeg
D30AB597-8A5C-4D5F-97DC-3B70F4E182C7.jpeg (3.07 MiB) Viewed 10633 times

0F828BAD-475D-490D-BE6C-E5166136E4FC.jpeg
0F828BAD-475D-490D-BE6C-E5166136E4FC.jpeg (4.63 MiB) Viewed 10633 times
9EF82FAC-3942-4BD9-8936-1AB02384AE90.jpeg
9EF82FAC-3942-4BD9-8936-1AB02384AE90.jpeg (165.92 KiB) Viewed 10633 times
User avatar
bullsi1911
Posts: 1207
Joined: Tue Jun 20, 2023 1:46 pm
Location: Austin By God Texas

Re: Good Bad & Ugly shops

Post by bullsi1911 »

old Ron wrote: Sat Jul 27, 2024 12:37 am [That's a nice looking set up .
It will be a good place to play around in for the winter months .
[





[/b]
That’s kind of reversed here. There is AC in that room, but no heat. I’ll be doing the reloading and tinkering when it’s a hunnert and hell outside, and go shooting in the cool weather
To make something simple is a thousand times more difficult than to make something complex.
-Mikhail Kalashnikov

AKA ‘Admin’
User avatar
jbp-ohio
Posts: 1157
Joined: Wed Jun 21, 2023 2:55 pm

Re: Good Bad & Ugly shops

Post by jbp-ohio »

bullsi1911 wrote: Sat Jul 27, 2024 1:57 pm
old Ron wrote: Sat Jul 27, 2024 12:37 am [That's a nice looking set up .
It will be a good place to play around in for the winter months .
[





[/b]
That’s kind of reversed here. There is AC in that room, but no heat. I’ll be doing the reloading and tinkering when it’s a hunnert and hell outside, and go shooting in the cool weather
It wouldn't take much to heat that small room. Just a small electric heater. Put it on a Wifi switch and you could start it an hour before you go up there.
User avatar
old Ron
Posts: 42
Joined: Mon Jun 26, 2023 10:27 am

Re: Good Bad & Ugly shops

Post by old Ron »

Well winter is closing in here
Had a good summer of construction & sorting at the west shops .
Now back to shop 1 & do more around here .
:D
Attachments
found 2024.JPG
found 2024.JPG (184.04 KiB) Viewed 10479 times
shop 2 2024.JPG
shop 2 2024.JPG (279.07 KiB) Viewed 10479 times
second floor wall 2024.JPG
second floor wall 2024.JPG (253.06 KiB) Viewed 10479 times
Post Reply