New eyes for one of my rifles...

General firearm discussions that do not fit in our specific firearm-related forums.
Post Reply
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

New eyes for one of my rifles...

Post by Orchidman »

Going back a few years.....about 2010/11 when I first made a trip to the SE, I purchased a Leupold VX3L scope which was for my TX3 in 7mm08. Some of you may not know what the 'L' means..........Here is a pic that explains it....
20250630_122139.jpg
20250630_122139.jpg (3.16 MiB) Viewed 2220 times
The 'L' series scopes had a cutout in the bottom of the scope to allow it to be mounted lower on a rifle, especially if it was a 50mm scope.
I originally wanted to buy 2, but unfortunately only found one 'L' on my trip. I did buy a second scope though, a plain VX3 4.5-14 X 50mm which I mounted on my TX3 Super Varmint in 22-250. Because it didnt have the 'cutout' I had to mount it on higher rings which wasnt a problem as the Varmint stock had an adjustable comb.

Over the past few years, some 'L' model second hand scopes have come up for sale over here ..............but Bh's son ( I nicknamed him 'Hoover' ) has beat me to the punch and now owns 3.......

Last thursday I was watching sport at 2.30am and when it finished, I logged on to a local shooting forum while I had a coffee......In the forsale section was a recent listing ( by someone who was up at 1.45am ) of a VX3L 4.5-14 X50mm scope. Knowing 'Hoover' would be tucked up in bed, I sent an email to the seller and after a couple of emails back and forth, I transferred the money into his account.

The scope arrived this morning.... ( The above pic is the scope)

Here is another pic...
20250630_122147.jpg
20250630_122147.jpg (2.97 MiB) Viewed 2220 times
The scope is in an 'as new' condition, the optics are clear, there are no marks/dents/scratches and it came with the original box and packing.

Now I have a decision to make as to which rifle will be blessed with it.....The 22-250 is without 'eyes' so my first thought is thats where it goes...but I could also play musical chairs and swap some other scopes around and put it elsewhere I guess.....
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

Orchidman wrote: Mon Jun 30, 2025 1:59 am Going back a few years.....about 2010/11 when I first made a trip to the SE, I purchased a Leupold VX3L scope which was for my T3 Lite in 7mm08. Some of you may not know what the 'L' means..........Here is a pic that explains it....

20250630_122139.jpg

The 'L' series scopes had a cutout in the bottom of the scope to allow it to be mounted lower on a rifle, especially if it was a 50mm scope.
I originally wanted to buy 2, but unfortunately only found one 'L' on my trip. I did buy a second scope though, a plain VX3 4.5-14 X 50mm which I mounted on my TX3 Super Varmint in 22-250. Because it didnt have the 'cutout' I had to mount it on higher rings which wasnt a problem as the Varmint stock had an adjustable comb.

Over the past few years, some 'L' model second hand scopes have come up for sale over here ..............but Bh's son ( I nicknamed him 'Hoover' ) has beat me to the punch and now owns 3.......

Last thursday I was watching sport at 2.30am and when it finished, I logged on to a local shooting forum while I had a coffee......In the forsale section was a recent listing ( by someone who was up at 1.45am ) of a VX3L 4.5-14 X50mm scope. Knowing 'Hoover' would be tucked up in bed, I sent an email to the seller and after a couple of emails back and forth, I transferred the money into his account.

The scope arrived this morning.... ( The above pic is the scope)

Here is another pic...
20250630_122147.jpg

The scope is in an 'as new' condition, the optics are clear, there are no marks/dents/scratches and it came with the original box and packing.

Now I have a decision to make as to which rifle will be blessed with it.....The 22-250 is without 'eyes' so my first thought is thats where it goes...but I could also play musical chairs and swap some other scopes around and put it elsewhere I guess.....
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

Orchidman wrote: Mon Jun 30, 2025 1:59 am
Orchidman wrote: Mon Jun 30, 2025 1:59 am Going back a few years.....about 2010/11 when I first made a trip to the SE, I purchased a Leupold VX3L scope which was for my T3 Lite in 7mm08. Some of you may not know what the 'L' means..........Here is a pic that explains it....

20250630_122139.jpg

The 'L' series scopes had a cutout in the bottom of the scope to allow it to be mounted lower on a rifle, especially if it was a 50mm scope.
I originally wanted to buy 2, but unfortunately only found one 'L' on my trip. I did buy a second scope though, a plain VX3 4.5-14 X 50mm which I mounted on my T3 Super Varmint in 22-250. Because it didnt have the 'cutout' I had to mount it on higher rings which wasnt a problem as the Varmint stock had an adjustable comb.

Over the past few years, some 'L' model second hand scopes have come up for sale over here ..............but Bh's son ( I nicknamed him 'Hoover' ) has beat me to the punch and now owns 3.......

Last thursday I was watching sport at 2.30am and when it finished, I logged on to a local shooting forum while I had a coffee......In the forsale section was a recent listing ( by someone who was up at 1.45am ) of a VX3L 4.5-14 X50mm scope. Knowing 'Hoover' would be tucked up in bed, I sent an email to the seller and after a couple of emails back and forth, I transferred the money into his account.

The scope arrived this morning.... ( The above pic is the scope)

Here is another pic...
20250630_122147.jpg

The scope is in an 'as new' condition, the optics are clear, there are no marks/dents/scratches and it came with the original box and packing.

Now I have a decision to make as to which rifle will be blessed with it.....The 22-250 is without 'eyes' so my first thought is thats where it goes...but I could also play musical chairs and swap some other scopes around and put it elsewhere I guess.....
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

'
User avatar
GrapeApe
Posts: 2231
Joined: Wed Jun 21, 2023 2:26 am

Re: New eyes for one of my rifles...

Post by GrapeApe »

Nice score, and I still have the pic of you in my kitchen, holding your NZ passport, hanging on my wall.
Good times that I sorely miss :cry: :cry: :cry:
Last edited by GrapeApe on Mon Jun 30, 2025 2:37 am, edited 1 time in total.
"Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it." - Samuel Clemens (aka Mark Twain)
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

.
User avatar
GrapeApe
Posts: 2231
Joined: Wed Jun 21, 2023 2:26 am

Re: New eyes for one of my rifles...

Post by GrapeApe »

..
"Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it." - Samuel Clemens (aka Mark Twain)
User avatar
Chiro1989
Posts: 1703
Joined: Wed Jun 21, 2023 2:35 am

Re: New eyes for one of my rifles...

Post by Chiro1989 »

And they say nothing good happens after midnight, nice score
I take no pleasure in the death of the wicked, but rather that they turn away from their ways and live. Eze 33:11
jkp
Posts: 521
Joined: Wed Jun 21, 2023 12:51 pm

Re: New eyes for one of my rifles...

Post by jkp »

Can't say that I've ever looked through one of those L models. Do you see the curve at the bottom?
User avatar
Zee
Posts: 2761
Joined: Tue Jun 20, 2023 2:23 pm

Re: New eyes for one of my rifles...

Post by Zee »

Cool find.
Talent hits a target no one else can hit; Genius hits a target no one else can see.
Wambli Ska
Posts: 4100
Joined: Tue Jun 20, 2023 3:09 pm

Re: New eyes for one of my rifles...

Post by Wambli Ska »

Sometimes it pays to stay up for a while. Good score!
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

Thanks guys.
Here are a couple of pics of my T3 7mm08 setup. It makes it a very compact looking and handling rig......for me at least.
20250630_141343.jpg
20250630_141343.jpg (1.91 MiB) Viewed 2144 times
20250630_141355.jpg
20250630_141355.jpg (2.8 MiB) Viewed 2144 times
And here is a crappy pic from my cell phone showing the scope from the business end of the barrel and how low it is.....
20250630_141325.jpg
20250630_141325.jpg (2.58 MiB) Viewed 2144 times
jkp wrote: Mon Jun 30, 2025 12:08 pm Can't say that I've ever looked through one of those L models. Do you see the curve at the bottom?
Nope....the view through the scope is a normal full circle. The only problem that sometimes can happen is that with some fat suppressors, you can see the suppressor in the bottom of the scope....All my suppressors have a low profile though and none of mine do this.
Freezer
Posts: 916
Joined: Sat Jun 24, 2023 9:51 am

Re: New eyes for one of my rifles...

Post by Freezer »

I have the VXL on my 6.5 X 06. I love it! Being that I'm not a large man it helps my cheek weld low.

Nice score!
Elk Creek
Posts: 1630
Joined: Tue Jun 27, 2023 2:01 pm

Re: New eyes for one of my rifles...

Post by Elk Creek »

Nice!
Diver43
Posts: 1267
Joined: Wed Jun 21, 2023 4:16 am

Re: New eyes for one of my rifles...

Post by Diver43 »

Now that is a Nice find
User avatar
CPJ 2.0
Posts: 3904
Joined: Tue Jun 20, 2023 1:57 pm

Re: New eyes for one of my rifles...

Post by CPJ 2.0 »

I get the point of it, but damned it’s ugly. 🤣
“The shepherd slaughters more of the flock than the wolf ever will.”
User avatar
Zee
Posts: 2761
Joined: Tue Jun 20, 2023 2:23 pm

Re: New eyes for one of my rifles...

Post by Zee »

CPJ 2.0 wrote: Tue Jul 01, 2025 1:02 am I get the point of it, but damned it’s ugly. 🤣
I wasn’t going to kick the man in the mass. But……you are correct.
Talent hits a target no one else can hit; Genius hits a target no one else can see.
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

CPJ 2.0 wrote: Tue Jul 01, 2025 1:02 am I get the point of it, but damned it’s ugly. 🤣
Its a working rifle ......Function over form...
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

Zee wrote: Tue Jul 01, 2025 1:18 am
CPJ 2.0 wrote: Tue Jul 01, 2025 1:02 am I get the point of it, but damned it’s ugly. 🤣
I wasn’t going to kick the man in the mass. But……you are correct.
See reply above... :lol:
PFD45
Posts: 562
Joined: Wed Jun 21, 2023 6:37 pm

Re: New eyes for one of my rifles...

Post by PFD45 »

CPJ 2.0 wrote: Tue Jul 01, 2025 1:02 am I get the point of it, but damned it’s ugly. 🤣
I disagree, the first time saw one of those I thought "Damn, I should have thought of that".

Sometimes a good idea is a thing of beauty all by itself.
User avatar
Orchidman
Posts: 347
Joined: Wed Jun 21, 2023 10:03 am

Re: New eyes for one of my rifles...

Post by Orchidman »

PFD45 wrote: Tue Jul 01, 2025 2:39 pm
CPJ 2.0 wrote: Tue Jul 01, 2025 1:02 am I get the point of it, but damned it’s ugly. 🤣
I disagree, the first time saw one of those I thought "Damn, I should have thought of that".

Sometimes a good idea is a thing of beauty all by itself.
I agree with the above.... :D
Wambli Ska
Posts: 4100
Joined: Tue Jun 20, 2023 3:09 pm

Re: New eyes for one of my rifles...

Post by Wambli Ska »

When I first saw those I half expected a bunch of other companies to do the same. Seems like a great way of fixing an actual problem. I imagine Leupold got the design patented and locked everyone else from executing it and that kind of fed it's own demise because gun folks don't like "new" unless everyone else goes along.
User avatar
GrapeApe
Posts: 2231
Joined: Wed Jun 21, 2023 2:26 am

Re: New eyes for one of my rifles...

Post by GrapeApe »

Nice score
"Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it." - Samuel Clemens (aka Mark Twain)
Post Reply