RP22 50'

General firearm discussions that do not fit in our specific firearm-related forums.
Post Reply
User avatar
Varmintmist
Posts: 511
Joined: Wed Jun 21, 2023 1:08 pm

RP22 50'

Post by Varmintmist »

rpconv50ft.jpg
rpconv50ft.jpg (34.08 KiB) Viewed 357 times
Took the RP and the AR with the 22lr conversion kit in it out to play. I had been told that the AR with conversion would like CCI subsonic so I took that and the Norma that I have a bunch of out to get good zeros at 50'. There is a gunclub that is open to the public on Wed nights for 50' shooting for real cheap, so that along with dry fire is going to be the routine this winter.

The targets are SR reduced to 50', approx 1 inch. Didnt come out exactly as I wanted because the transfer from PC to printer failed so I guessed % on the printer until it was close.

Apparently the Ruger is pretty happy with the Norma. Not so much the CCI subs
The AR conv was.... OK I guess. Good enough that come close to the season start I will be ok with shooting it as practice. If it is in the center, it will cut black.
JunkCollector
Posts: 877
Joined: Wed Jun 21, 2023 9:26 am

Re: RP22 50'

Post by JunkCollector »

The AR conversation looks to have enough potential.
I'd keep trying different food with it.
fisheadgib
Posts: 162
Joined: Wed Jun 21, 2023 3:37 am

Re: RP22 50'

Post by fisheadgib »

Did you mean 50yds., or 50ft? 50' is 50ft and I'd expect that rifle to shoot one ragged hole at that distance with almost any ammo.
User avatar
Varmintmist
Posts: 511
Joined: Wed Jun 21, 2023 1:08 pm

Re: RP22 50'

Post by Varmintmist »

50 feet. I reduced the 200 yard targets to the same sight picture at 50' so I wanted to get a 50' zero on the RP to shoot at the indoor range and make it worth while practice
Post Reply