Guns & Outdoors Forum

Make_My_Day

I hope he has a full recovery.

Make_My_Day

Merry Christmas, Happy Hanukkah, Happy New Year to all. The 27th was my 79th trip around the sun.

Make_My_Day

That is such a pretty kitty. Good luck.

Make_My_Day

We lost power for an hour on Wednesday night. A small piece of shingle blew off the roof, and the phone and internet went down. Some roads washed out and flooding closed a few of them for a couple of days. Other than that, it wasn't too bad.

Make_My_Day

2024 KLR650. Now to not get dead whilst riding. One of the best ways to avoid having a crash with a car is to watch for vehicles coming out from the side. Slow down when crossing intersections, passing driveways and side streets. If a car looks like it might make a left turn in front of you, flash ...

Make_My_Day

That machine looks like one of those offroad/touring hybrids. Should be nice if you want to hit the trails for a change of pace while out riding the pavement. BTW, I bought some of those padded undershorts specifically for taking long rides. They work pretty well for my kind of riding. Without those...

Make_My_Day

Wow, this place is also a great and accurate source of medical information.....

Make_My_Day

Happy July 4th.

Make_My_Day

I recently turned 78, but I like tech stuff. I'm just selective about it. I'm not going to spend a hundred $ on something that saves me 5 or 10 seconds of time and/or commits me to paying 25 bucks a month to run it. The only exceptions are smart phones, satellite TV and internet, which are almost a ...

Make_My_Day

We're getting Chinese food from the local Buffet and special-order place. It's pretty good food and they're open on Christmas.
Merry Christmas to everyone!!

Make_My_Day

Thanks....my Hobart 190 using 240V power will do welding with flux core wire or plain wire with gas on steel, gas with Aluminum wire and gas with Stainless. Now that flux core wire for stainless is available, I want to try that as well. I don't know how long this flux-core wire for stainless has bee...

Make_My_Day

Flux core will always be second best to inset gas shielded, but if you want to glue two pieces of metal together, it will do it, and do it fine for almost any use a home gamer will be using it for. It’s more expensive (per pound of wire) but you also don’t need a tank of gas. Thanks for the info. I...

Make_My_Day

I recently learned that you can do MIG welding on stainless steel without using inert gases. There is a flux-cored welding wire available in a few different diameters that can be used to weld stainless. I watched a couple of Youtube videos on the subject, and the method doesn't seem to be much diffe...

Make_My_Day

It's the painters that screwed up. I'm surprised that the owners of the company didn't make them fix it before they did work for someone.

Make_My_Day

Maybe they should throw Pocahontas into the harbor.

Make_My_Day

Want REAL revenge? Find some copper nails somewhere, and nail a few of them into the tree. They will kill the tree. You could also buy some Copper Sulfate in a garden store and put it around the base of the tree or mix with water and spray it on the leaves. Same result.

Make_My_Day

I'm a bit late, but I hope everyone had a nice Thanksgiving. This is going to sound blasphemous, but we had a great turkey dinner using Boarshead turkey cold cuts sliced very thick, simmered in McCormick gravy, Stovetop stuffing, baked potatoes and green beans, with home made ice cream and Rugelah f...

Make_My_Day

$2.89 today at Race Track in Mt. Dora, FL. Been going down steadily as a result of less demand, and the reopening of some refineries that needed maintenance and are now back online.

Make_My_Day

We got a few hard rains but that was about it. We live 40 miles NW of downtown Orlando.

Make_My_Day

Wow, it all seems like more than one person could bear. I hope things turn up a little brighter than they have been. Good luck in trying times.

Make_My_Day

Big Al1 wrote: ↑Mon Aug 07, 2023 4:12 pm Glad you're doing better! I think this china virus is with us for good!

Make_My_Day

Zorba wrote: ↑Mon Aug 07, 2023 7:59 pm Daughter came down with it several days ago.

It seems to be making a resurgence in the US. Lot of cases going on.

Make_My_Day

Wambli Ska wrote: ↑Mon Aug 07, 2023 2:38 pm That sucks. Glad you’re bouncing back! How was your trip?

Riding was great, but somewhat limited because of rain most days, but we got in some good rides.

Make_My_Day

I came back from a trip to North Carolina and a Maggie Valley 7 day motorcycle expedition last Monday. I started coming down with symptoms on Saturday night before returning half-way on Sunday. At first I thought it was from inhaling road dirt from the numerous road construction areas we rode throug...

Make_My_Day

bullsi1911 wrote: ↑Sat Jul 15, 2023 1:26 am Change it to say “MUST have sex frequently after discharge”

Then laminate and put on fridge

It should read "You must discharge frequently after sex."

Guns & Outdoors Forum

Search found 29 matches

Re: Need a few prayers

Re: Merry Christmas! Happy Hanukkah! and a Happy and blessed New Year to you all!

Re: New family member.....

Re: "Uncle" (hurricane) Milty

Re: Happy midlife crisis to me!

Re: Happy midlife crisis to me!

Re: Eyesight problems........

Re: Happy Independence Day

Re: 'Warming' up to home tech......

Re: What’s cooking for Christmas?

Re: Welding Stanless Steel

Re: Welding Stanless Steel

Welding Stanless Steel

Re: I don't think I'd let these guys intall my flooring.

Re: Boston Tea Party

Re: Need the forums wisdom. Neighbor issue

Re: HAPPY THANKSGIVING

Re: Local price for Regular gas?

Re: Idalia

Re: It has been a pretty crappy past few months

Re: CAME DOWN WITH COVID LAST WEEK

Re: CAME DOWN WITH COVID LAST WEEK

Re: CAME DOWN WITH COVID LAST WEEK

CAME DOWN WITH COVID LAST WEEK

Re: SHOCKING post-op activities...